assalamualaikum wr.wb

kali saya membagikan cara setting telnet bagian CLI pada router

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!



Router>enable
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname annker
annker(config)#int f0/0
annker(config-if)#ip addr 192.168.1.1 255.255.255.0
annker(config-if)#no shut

annker(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

annker(config-if)#exit
annker(config)#username annker password annker
annker(config)#enable secret annker
annker(config)#line vty 0 4
annker(config-line)#login local
annker(config-line)#exit
annker(config)#

kemudian masuk pada PC atur  ip, subnet masknya serta default gatewaynya...

lalu ping routernya melalui CMD..

kalau sudah me reply

ketikan perintah (di cmd pc) :
pc>telnet (ip router)
contoh : telnet 192.168.1.1

lalu masukan username dan passwordnya...